MORTARS

1. REPAIR, RESTORATION AND STRENGTHENING

1.1. SIKA – MONOTOP 610

It is a cement based, polymer modified, single component coating material containing silica fume and corrosion inhibitor, used as corrosion protection and adherence mortar for reinforcement.

Ø Corrosion protection of reinforcement in concrete repair

Ø It is used as part of the repair system and as an adherence mortar to the concrete surface.

Ø Can only be used by mixing with water.

Ø Excellent adhesion to concrete and steel.

Ø Resistant to water and chloride penetration.

Ø Resistant to the effects of frost dissolving salts.

Ø Not adversely affected by ambient humidity.

Ø High mechanical strength.

TECHNICAL SPECIFICATIONS AND THE TSE STANDARD
Layer Thickness	App. 1mm
Outside Air Temperature	+5 °c min.; +30 °c maks.
Surface Temperature	+5 °c min.; +30 °c maks.
Container Life	~90 – 120 minutes (23°c)
Waiting Time Between Floors	If it is to be applied as an adherence enhancer, the repair mortar to be applied after drying.

1.2. SIKA – MONOTOP 612

Cement based, polymer modified, low chlorine permeability, single component, R4 class repair mortar containing silica fume and fibres.

Ø Repair of all kinds of reinforced concrete structures

Ø Horizontal, vertical and overhead repairs

Ø Indoor and outdoor use

Ø Columns, beams and slabs, rod holes

Ø It is one component and can be used only by mixing with water.

Ø Ideal for vertical and overhead applications with its thixotropic properties.

Ø It has high mechanical strength.

Ø It has high resistance against frost and corrosive salts.

Ø Application thickness can be up to 30 mm in a single layer.

Ø Non-corrosive and non-toxic.

Ø Can be applied by spraying or trowelling.

Ø A1 flammability rating

TECHNICAL SPECIFICATIONS AND THE TSE STANDARD
Chemical Structure	Cemented grey powder
Shelf Life	12 months
Fresh Mortar	1,10±0,10 kg/l
Maximum Grain Size Dmax	2,10±0,10 kg/l
Product Declaration	1 mm
Ambalajlama	EN 1504-7

2. WATER INSULATION PRODUCTS

2.1. MAPEI – MAPELASTIC

wo-component, flexible, cement-based mortar for waterproofing balconies, terraces, bathrooms and swimming pools..

TECHNICAL SPECIFICATIONS AND THE TSE STANDARD
Pot Life of the Mixture	App. 1 hour.
Consistency of Mixture	Plastic retractable
Storage	12 months in original sealed packaging.
Consumption	– Trowel: 1.7 kg/m²/mm thickness;
Packaging	– spray: 2,2 kg/m²/mm thickness.

Ø Complete system

Ø Sound insulation

Ø Thirty years of experience

Ø Maximum guarantee

Ø Excellent adhesion

Ø Restores and improves

Ø High level of breathability

Ø High flexibility

Ø Resistant against UV rays.

Ø Prevents CO2 penetration

Ø Proven reliability

Ø Reliable solutions

Ø Application at low temperatures

Ø Fast, simple implementation

2.2. SIKA – TOP SEAL 107 ELASTIC

Cement based, elastic waterproofing insulation material containing liquid polymer and special additives.

TECHNICAL SPECIFICATIONS AND THE TSE STANDARD
Doping Control Centre of Hacettepe University Faculty of Pharmacy Doping Control Centre	(B.30.2.HAC.0.AP.00.00/2006-002) – (03.01.2006)
Approval for contact with drinking water according to standard 6920	November 2000
By the Department of Environmental Engineering, Faculty of Civil Engineering, Istanbul Technical University. Approval for contact with drinking water	22.08.2016

2.3. SIKA – 1

Liquid waterproofing additive for mortar and concrete.

TECHNICAL SPECIFICATIONS AND THE TSE STANDARD
Chemical Structure	Mixture of inorganic compounds and silicate
Appearance / Colour	Yellow liquid
Shelf Life	Suitable for use in its original unopened and undamaged packaging for 24 months from the date of production.
Storage Conditions	Should be stored between +5 °C and 30 °C. Protect from direct sunlight, frost and material contamination.
Density	~1,0 g/cm³
PH Value	~10±1
Packaging	6 and 30 kg plastic drums, 200 kg drums

Ø Ready to use

Ø Easy to apply

Ø Plasters, plaster mortars and screeds

Ø Reinforced concrete and unreinforced concrete

Ø Brick, concrete and stone surfaces

Ø Basement, swimming pool, tunnel, water tank, manhole,

Ø Indoor and outdoor applications such as culverts

Ø Increasing mortar/concrete water impermeability

2.4. SIKA – 2

It is a very fast setting liquid waterproofing additive. It hardens immediately when mixed with Portland Cement and hardens very quickly. It quickly seals cracks, cracks and holes with water leakage in concrete, rock or masonry works.

TECHNICAL SPECIFICATIONS AND THE TSE STANDARD
Chemical Structure	Blending of inorganic chemicals
Appearance / Colour	Pink-red clear liquid
Shelf Life	Suitable for use for 24 months from the date of production.
Storage Conditions	It should be stored in its original, unopened and undamaged packaging, in a dry environment, protected from extreme heat and frost, between +5°C and +30°C.
Density	~1,25 kg/litre
PH Value	~12
Packaging	7.5 kg and 35 kg plastic drums

Ø No need to dilute

Ø It hardens quickly.

Ø It is only used by adding to cement.

Ø Does not contain chloride

2.5. SIKA – SEPAROL W3

Sika Separol W3 has been developed for use in prefabricated plants on construction sites, especially in the following application.

USAGE AREAS

Ø Smooth and non-absorbent mould surfaces

Ø Absorbent moulds

Ø In heated moulds (up to +70°C)

Ø Patterned moulds

Ø Features Benefits

Ø Low viscosity

Ø Excellent adhesion to vertical moulds

Ø Self-levelling after spray application

Ø Free from flammable vapours

Ø Does not form resin

Ø Reduces dust residues on mould surfaces.

Ø Safe handling for employees

3. CERAMIC JOINT FILLER

3.1. MAPEI – KERACOLOR FF

6 mm wide, pre-mixed, high performance, polymer modified, polymer modified cement based mortar with water repellent technology for grouting joints up to 6 mm wide.

	Ø Water repellent Ø Durable and strong Ø Easy workability Ø Easy to clean Ø Uniform mortars without cracks Ø Good resistance to acids Ø Very low VOC emission
TECHNICAL SPECIFICATIONS AND THE TSE STANDARD
Pot Life of the Mixture		App. 2 hours
Waiting Time Before Finishing		10-20 minutes
Opening to Light Pedestrian Traffic		About 24 hours
Ready to use time		After approximately 2 minutes, the floors are ready for use. 3 days. Swimming Pools and Tanks Can Be Filled 7 Days After Injection
Packaging		25 Kg Bags and 4×5 Kg Boxes

3.2. MAPEI – KERACOLOR GG

4 to 15 mm wide, pre-mixed, high performance, polymer modified cementitious mortar for grouting.

TECHNICAL SPECIFICATIONS AND THE TSE STANDARD
Pot Life of the Mixture	App. 2 hours
Waiting Time Before Finishing	10-20 minutes
Opening to Light Pedestrian Traffic	App. 24 hours
Ready to use time	7-10 days.
Storage	12 months (22-25 kg bags), 24 months (5 kg bags).
Consumption	According to the size of the joints
Packaging	25 Kg Bag and 4×5 Kg Alupack Boxes According to Colour.

3.3. MAPEI – KERACOLOR SF

Fine grained, high performance white cement based mortar for joint fillings up to 4 mm in width.

TECHNICAL SPECIFICATIONS AND THE TSE STANDARD
Pot Life of the Mixture	App 2 hours
Waiting Time Before Finishing	10-20 minutes
Opening to Light Pedestrian Traffic	App 24 hours
Ready to Use	7 days.
Storage	12 Months (22 Kg Bag), 24 Months (5 Kg Bag)
Consumption	According to the Size of the Joints
Packaging	22 Kg Bag and 4×5 Kg according to colour.

3.4. MAPEI – KERACOLOR PPN

High-strength, quick-setting pozzolan mortar with very low water absorption for joint filling of paved floors with 5 to 30 mm wide joints exposed to heavy loads and heavy traffic.

TECHNICAL SPECIFICATIONS AND THE TSE STANDARD
Pot Life of the Mixture	20 minutes.
Colour	113 cement grey.
Set to Light Pedestrian Traffic	1 hour.
Ready to Use	3 days for light and medium traffic, 7 days for heavy traffic.
Storage	12 months
Consumption	According to the size of joints and slabs.
Packaging	25 kg bag

SELIX- JOINT 300

Cement based joint filling mortar.

USAGE AREAS

It is used in joint applications of ceramic, tile, etc. coating materials up to 6 mm. width..

SELIX- JOINT 330

Cement based, silicone added, joint filling mortar.

USAGE AREAS

It is used in joint applications of ceramic, tile etc. coating materials up to 6mm. width.

SELIX- JOINT 350

Cement based, polymer added, elastic and high performance joint filling mortar.

USAGE AREAS

It is used in joint applications of ceramic, tile etc. coating materials up to 6mm. width. Used in wet areas such as pools, water tanks. It is used in places where there is intense pedestrian and load traffic and sudden temperature changes such as exterior facades, terraces, underfloor heating systems, warehouses.

4. CERAMIC ADHESIVES

4.1. MAPEI – ADESILEX P9 (C2TE)

High-performance cement-based adhesive for ceramic tiles and stone materials without vertical slippage and long open time.

Ø Versatile

Ø Anti-slip feature on vertical surfaces

Ø Excellent price/quality ratio

TECHNICAL SPECIFICATIONS AND THE TSE STANDARD
Pot Life of the Mixture	More than 8 hours.
Open Time	30 minutes.
Waiting Time Before Injection	– on the walls: 4-8 hours;
Set to Light Pedestrian Traffic	– on floors: 24 hours.
Ready to Use	approx. 24 hours.
Storage	approx. 14 days
Consumption	Trowel with N° 4, 5 or 6 teeth.
Packaging	12 months (25 kg bag), 24 months (5 kg bag)

4.2. SIKA CERAM 205 (C2TES1)

SikaCeram®-205 used for bonding ceramics with thin bed method is made ready for use by adding water.

Ø For all ceramic types

Ø Non-water sensitive natural stones and marbles, porcelains

Ø Bonding

Ø Indoor walls and floors, outdoor floors

Ø On floors with water-based underfloor heating system

Ø Gluing ceramics on old ceramics in interior spaces

Ø Floors requiring high performance; swimming pool, industrial and high traffic volume floors

Ø Bonding of thermal insulation boards such as polystyrene, polyurethane foam, glass wool and rock wool

TECHNICAL SPECIFICATIONS AND THE TSE STANDARD
Chemical Structure	Polymer modified cement based mortar
Appearance / Colour	Grey / white powder
Shelf Life	12 months.
Maximum Grain Size Dmax	T.h.b.a. :~ 1,6 kg/lt (+20°c) (en 12190)
Packaging	0.3 mm (EN 12192-1)

4.3. SIKA CERAM 60 (C1T)

SikaCeram 60 is a one-component, cement-based, water-additive ceramic adhesive mortar.

TECHNICAL SPECIFICATIONS AND THE TSE STANDARD
Chemical Structure	Cement based mixture containing water retaining additives
Appearance / Colour	Grey / White Powder
Shelf Life	12 months from the date of manufacture.
Storage Conditions	SikaCeram®-60 should be stored correctly in its original, unopened and undamaged packaging, in a dry environment, protected from moisture.
Density	~ 1,5kg/l (at +20°C)
Maximum Grain Size Dmax	0.5 mm (EN 12192-1)
Packaging	25 kg kraft bag

USAGE AREAS

Ø Bonding of absorbent ceramics

Ø Internal and external

Ø Wall and floor applications Bonding of thermal insulation boards such as polystyrene, polyurethane foam, glass wool and rock wool

4.4. SELIX-FIX 100 (C1T)

Cement based ceramic adhesive mortar.

USAGE AREAS

It is used to apply ceramic, glass mosaic, tile etc. coating materials horizontally and vertically indoors and only horizontally outdoors; on surfaces such as concrete slabs, plaster, screed.

4.5. SELIX- FIX 110 (C2TE)

Cement based porcelain ceramic and granite ceramic adhesive.

USAGE AREAS

Ceramic, porcelain ceramic and granite ceramic etc. coating materials are used horizontally and vertically indoors and outdoors.

4.6.
SELIX- FIX 150 (C2TE S1)

Elastic, polymer-added ceramic adhesive with reduced slip properties, extended open dwell time and improved with additional properties.

USAGE AREAS

It is used for horizontal and vertical application of coating materials such as ceramic, natural stone, travertine, decorative brick, granite, porcelain ceramic, etc. on surfaces such as concrete, plaster, screed, for ceramic coating on old ceramic, granite, in wet areas such as pools, water tanks, cold storages, etc., on terraces and balconies, in places such as shopping-business centres, hospitals, schools with heavy pedestrian and freight traffic.

4.7. SELIX- FIX 170 (D2TE)

Acrylic emulation based, high performance, ready to use ceramic adhesive.

USAGE AREAS

It is used for bonding ceramic, tile, teracotta and similar coating materials on interior walls, on surfaces that may be exposed to flexing, especially on gypsum plaster and painted surfaces and on interior thermal insulation boards.

5. SILICONE

It is a product that has an elastic structure used in waterproofing and various insulation areas and does not lose this elastic property even when it dries.

SILICONE TYPE

Ø Shower cubicle silicone

Ø Neutral mirror silicone

Ø Aquarium silicone,

Ø High temperature silicone

Ø Acetoxy high temperature silicone

Ø Neutral high temperature silicone

Ø Neutral marble silicone

Ø Neutral epdm silicone

Ø Neutral B1 fire resistant silicone

Ø Universal silicone

Ø Neutral exterior silicone sealant

Ø Neutral structure

Ø Construction silicone

Ø Neutral kitchen bathroom silicone sealant

6. FOAM

POLYURETHANE FOAM

Ø Foam with valve

Ø Thermal and acoustic insulation foam

Ø Foam with gun

Ø Door window foam

Ø Mounting foam

Ø Filling foam

Ø B1 fire resistant foam

Ø B2 fire resistant foam

Ø Montalma foam

Ø Mounting foam with gun

Ø Foam cleaner

7. MASTIC

7.1. POLYURETHANE MASTICS

Ø PU sealant general purpose shore 25/40

Ø PU sealant automotive/industry shore 50

7.2. SILICONISED AND ACRYLIC MASTICS

Ø Siliconised mastic

Ø Super siliconised mastic

Ø Transparent siliconised mastic

Ø Acrylic mastic

8. ADHESIVE

One component silicone mastic suitable for use on non-porous surfaces such as glass, tiles and ceramics.

ADHESIVE TYPE

Ø Polyurethane express transparent liquid nails

Ø Acrylic liquid nails

Ø Transparent express marine glue

Ø Amber sea glue

Ø Fast adhesive

Ø Gel glue

Ø Chemical dowel adhesive

MAPEI MAPEFLEX MS 45

Polymer Based Adhesive is an additional component, flexible, thixotropic and fast setting polymer based hybrid sealant and adhesive with high elasticity. It is also suitable for damp substrates. Mapeflex MS 45 has been specially developed for sealing expansion and control joints on both horizontal and vertical surfaces.

Now There’s a better way to build

MORTARS

MORTARS

1. REPAIR, RESTORATION AND STRENGTHENING

1.1. SIKA – MONOTOP 610

1.2. SIKA – MONOTOP 612

2. WATER INSULATION PRODUCTS

2.1. MAPEI – MAPELASTIC

2.2. SIKA – TOP SEAL 107 ELASTIC

2.3. SIKA – 1

2.4. SIKA – 2

2.5. SIKA – SEPAROL W3

3. CERAMIC JOINT FILLER

3.1. MAPEI – KERACOLOR FF

3.2. MAPEI – KERACOLOR GG

3.3. MAPEI – KERACOLOR SF

3.4. MAPEI – KERACOLOR PPN

SELIX- JOINT 300

SELIX- JOINT 330

SELIX- JOINT 350

4. CERAMIC ADHESIVES

4.1. MAPEI – ADESILEX P9 (C2TE)

4.2. SIKA CERAM 205 (C2TES1)

4.3. SIKA CERAM 60 (C1T)

4.4. SELIX-FIX 100 (C1T)

4.5. SELIX- FIX 110 (C2TE)

4.6.
SELIX- FIX 150 (C2TE S1)

4.7. SELIX- FIX 170 (D2TE)

5. SILICONE

6. FOAM

POLYURETHANE FOAM

7. MASTIC

7.1. POLYURETHANE MASTICS

7.2. SILICONISED AND ACRYLIC MASTICS

8. ADHESIVE

MAPEI MAPEFLEX MS 45

SITE MAP

CONTACT

GALLERY